Peg: Difference between revisions
Created page with "{{Infobox component | title = Peg | id = MHG.Peg | caption = Peg | configurable = 0 | io.minInputs = 1 | io.maxInputs = 1 | io.outputs = 0 }} The '''Peg''' is a component used to route signals. == Behavior == Pegs are just a single input. When connected to other components with wires, they pass on the signals they receive from connected outputs. == Placement == The Peg can be placed in the center of a Circuit Board s..." |
(No difference)
|
Latest revision as of 02:53, 9 September 2025
 Peg | |
| Component info | |
|---|---|
| Internal ID |
MHG.Peg |
| Configurable | No |
| Input and output | |
| Input count | 1 |
| Output count | 0 |
The Peg is a component used to route signals.
Behavior
Pegs are just a single input. When connected to other components with wires, they pass on the signals they receive from connected outputs.
Placement
The Peg can be placed in the center of a Circuit Board square, in the center of a Circuit Board edge, or on top of a Mount. Using Fine Placement, Pegs can also be placed at 8 additional spots in a board square, and at 2 additional spots on a board edge. Pegs can be fine-rotated.
