Through Peg: Difference between revisions
Created page with "{{Infobox component | title = Through Peg | id = MHG.ThroughPeg | caption = Through Peg | configurable = 0 | io.minInputs = 2 | io.maxInputs = 2 | io.outputs = 0 | io.propagationDelay = 0 }} The '''Through Peg''' is a component used for routing signals. The inputs on each side are linked as if connected by a wire, so signals travel through them instantly. They allow for easily routing signals between sides of a Circuit Boa..." |
(No difference)
|
Latest revision as of 02:57, 9 September 2025
 Through Peg | |
| Component info | |
|---|---|
| Internal ID |
MHG.ThroughPeg |
| Configurable | No |
| Input and output | |
| Input count | 2 |
| Output count | 0 |
| Propagation delay | 0 ticks |
The Through Peg is a component used for routing signals. The inputs on each side are linked as if connected by a wire, so signals travel through them instantly. They allow for easily routing signals between sides of a Circuit Board.
Behavior
When one side of a Through Peg receives a signal, the other side will also receive that signal, updating on the same tick.
Placement
The Through Peg can only be placed in the center of a Circuit Board square. It can be fine-rotated.
